The totex question
Has total expenditure (totex) become enshrined in utilities' practices? A special pan-utility roundtable held at Utility Week Live sought to find out.
18th July 2019 by Networks
Only a few years ago, totex was the biggest buzzword in utilities. Totex – or total expenditure – was the new approach to regulation and accounting intended to end the traditional, perceived bias towards ‘pouring concrete’ or ‘putting copper in the ground’ – in other words, investing large amounts of money (capital expenditure) in physical assets. Under the old regulatory frameworks, utilities were effectively rewarded for doing this, as expenditure on maintenance or on non-physical solutions (operational expenditure) was treated less favourably – meaning that companies that built more, were valued higher and ultimately made more money.
Totex, enshrined in AMP6 and RIIO1, the current regulatory regimes for water companies and energy networks, was meant to end all that. Did it work? That was the question Utility Week asked industry leaders at a special roundtable bringing together pan-industry leaders, at Utility Week Live in Birmingham in May in partnership with Costain and sister titles Network and Water and Wastewater Treatment.
These are some of the questions we asked, and the answers we heard:
How far has totex been adopted?
It’s a mixed picture. Delegates agreed that utilities had adopted totex thinking, to an extent. This has been driven by the regulatory shift to focus on outcomes, giving utilities the freedom to deliver those outcomes in new and different ways – for example, via catchment management, whereby water companies address water quality issues with farmers and other local stakeholders at source, before they get to the treatment works. The focus on outcomes has been supported by regulatory incentives – Outcome Delivery Incentives (ODIs) have been particularly effective in the water sector.
But this is just the start. Delegates suggested that while totex thinking has been applied to the current asset base, the real challenge will come in the next regulatory cycles.
What impact will AMP7 and RIIO2 have on utilities’ approach to totex?
The new regulatory regimes for water companies and energy networks are putting unprecedented pressure on utilities to deliver more for less. “Totex thinking is going to have to come more to fruition [under AMP7],” noted one water company delegate. He added that under the current regime, companies have “driven efficiency after efficiency”, and there simply isn’t the headroom to continue making savings in this way. Thus, a true step change, embracing the potential of disruptive technology to really do things differently, will be required. “Totex thinking has got to go to the next level,” he said, “as you get disruptive technologies that actually work, that will give us a mechanism for not building unsustainable chemical treatment plants, or whatever it might be.”
What challenges do utilities face in embracing totex?
While the economic regulators Ofgem and Ofwat have led the drive for totex thinking, utilities businesses are still operating in a framework that is not entirely sympathetic. Accounting rules in particular remain a challenge. For example, in the energy networks industry, the shift towards smart grids and the ‘distribution system operator’ (DSO) model, whereby energy generation and demand is balanced at a local level, is driving the introduction of much greater monitoring and control on the system. This drives up the operational cost of running the grid – as does the additional staffing required to manage and act on the data generated. Under current accounting rules, capital expenditure such as that on a new asset is depreciated – discounted from the balance sheet over a number of years – whereas operational expenditure comes straight off the annual profit. Moreover, even where costs such as new technology systems or refreshes are classified as capital expenditure, they are depreciated over much shorter periods of time than traditional long-life assets, making them less attractive from an accounting point of view. As one delegate said, “Whilst we’re in a totex environment, in terms of your profit and loss, you’ve still got to keep your overheads down.”
With affordability riding high on the policy agenda, how are utilities prioritising their investment on asset maintenance and capital programmes?
Delegates revealed that in some instances, they are having to ‘sweat the assets’, getting maximum life out of every piece of kit by prioritising maintenance over the capital expenditure required to build new assets. This approach is supported by new technologies which facilitate condition-based monitoring – rather than have a rolling programme of maintenance based on the age or usage of an asset, utilities are able to target their maintenance spend on assets that most urgently require it. While this is a logical approach, it does create difficulties, because service must never be compromised – and delegates acknowledged that incidents such as last year’s Beast from the East highlighted what they tactfully called ‘resilience gaps’.
Likewise, energy networks are moving away from pure cyclic-based maintenance, and using new techniques, such as satellite monitoring, to improve efficiency and target investment at those assets that most urgently need it. Networks are currently signed up to an agreed set of common risk levels for each class of asset and have to collect a significant amount of data to feed into the required risk assessments.
What is the role of the supply chain in delivering a totex culture?
As utilities move away from the traditional approach of ‘fix on fail’ to condition-based monitoring, the skills required to run the network are changing. A network filled with sensors requires data and technology specialists to capture, interpret and act on the data they produce. For one delegate, this prompted the question: “Going forward, how much do we ask the supply chain to step into this?”
Traditionally, the supply chain has built assets for utilities. Totex thinking, coupled with the emergence of new and more complex technologies, inevitably drives a major shift in this relationship. As the management of utilities becomes more complex, the supply chain is stepping into new service models, whereby a supplier might, for example, build, operate and maintain an asset on an ongoing basis.
What role has innovation funding played in driving the adoption of totex?
Delegates from the energy networks sector agreed that innovation funding has been critical in allowing them to experiment with different approaches and drive a totex culture within their businesses. The example of Project Freedom was cited – a collaboration between two networks, investigating multi-vector solutions to domestic heating. The learnings from such innovation projects are shared between the networks encouraging a collaborative approach to innovation.
View from the chair: totex, or not totex?
Seven years ago, totex was the biggest buzzword in the business – this was before ‘innovation’ was on everyone’s lips, and long before most people had even heard of today’s Labour leader Jeremy Corbyn with his headline-grabbing policy to renationalise the nation’s energy and water companies. As the water and network industries prepared for PR14 and RIIO1, the introduction – or extension – of totex in the regulatory system was big news, with utilities keen to explore the approach but often worried about their ability to deliver.
Fast forward to today, and we don’t hear so much about totex. There could be two reasons for this change. Could it be that utilities have fully embraced totex, realised its benefits, and embedded it so deeply in their culture that they no longer need to talk about it? Or could it be that the ‘totex’ box has, on the surface, been ticked, and utilities have moved on the newer buzzwords?
This was the question I put to delegates at Utility Week and Costain’s recent roundtable on ‘totex and transformation’. The answer was unexpected – and in fact, challenged the grounds of the question itself.
Rather than a binary approach – totex, or not totex – it seems that the industry has moved on to a point where the question of totex has been absorbed in the much bigger issue of whole systems planning. That is to say, it’s no longer just about whether to build a new asset or come up with another solution; rather, it’s a question of looking holistically at the infrastructure system, cross-vector, and determining the best solution.
It’s a complicated picture, throwing up questions about who will govern a multi—vector system, and whose role it is to drive it forward. While government is struggling with the current Brexit-induced leadership vacuum, delegates name-checked the increasingly influential National Infrastructure Commission, chaired by Sir John Armitt, as having both the nous and the political clout to come up with the right solution. With the commission currently investigating regulation in utilities, watch this space.
Ellen Bennett, publishing director, utilities
Login on register to comment
Electric storage heating – a Cinderella solution
Why has electric storage heating been overlooked as we seek to tackle decarbonising domestic heat?
Prospects bright for landmark East London Heat Network
New Vattenfall-Cory partnership marks step towards record-breaking heat network capable of serving over 10,000 homes
New construction director at Switch2 Energy
Appointee brings experience from Vattenfall and Eon
Related supplier content
Load patterns and lockdown: how Covid-19 is impacting electricity networks
Insights into dynamics on the low voltage network as the outbreak unfolds
Protect electrical equipment from insulation failure
Insulation faults are a major cause leading to the eventual failure of electrical equipment. Partial discharge (PD) is a very reliable indicator of developing insulation faults. Regular PD testing allows users to detect and analyze PD activity
How E.ON. is helping the City of London become a zero emissions city
Discover Citigen. Deep in the heart of our bustling capital